HOW TO USE
Apply after you make sure the surface is clean and free of dust, loose particles and other pollutants.
Then apply the primer POWERFLEX 300 PRIMER in order to strengthen the substrate.
Following by coating with HYDROFLEX 500 by brush or roller. Apply two coats in cross direction after drying of the primer. The second layer is applied after drying the first layer. The first layer is diluted with 10% water and the second is diluted with 5% water. The surface is firm and compact for 24 - 48 hours depending on the temperature, humidity and thickness of the coating.
This elastomeric retainer is applied to problem areas such as roofs, terraces, balconies, etc Ideal for difficult sealing points (angles, joints with adjacent walls, pergola bases).
The application of HYDROFLEX 500 shouldn't be at a temperature less than 8 ° C or higher than 35 ° C and not apply when provided rain or frost.
Protect from direct sunlight and frost
|Consuption||1.0 -1.5 kg / m2 depending on the substrate smoothness and thickness of the base layer.|